$20.00
We will hold your cart for 15:00.
Buy the Cobra SC 200/SC 400 Adhesive Mount online for $14.98 (50% off $29.95) for a sleek, secure windshield install with easy slide-off dash cam removal.
Categories : Dash Cams and Accessories
SKU : POW-DAS-518
The Cobra SC 200/SC 400 Adhesive Mount (item #CA-200ADHMNT-001) is the official adhesive windshield mount for a sleek, clean installation of your SC 200, SC 200D, SC 400, or SC 400D smart dash cam. The slide mount system lets you remove the camera instantly for storage or travel and re-seat it securely — all for $14.98, 50% off the $29.95 compare-at price. Apply coupon OUTPOST12 for an extra 12% off.
Choose a placement on the windshield behind the rearview mirror with clear forward view. Clean the glass thoroughly with isopropyl alcohol and let it dry. Peel the adhesive backing, press the mount flat against the glass for 30 seconds, and let it cure for best adhesion before sliding the dash cam onto the mount until it clicks.
For the SC 400, mount centrally behind the mirror so the front lens has an unobstructed view and any connected accessory camera cables can route neatly along the headliner.
To remove without harming the windshield or dash cam, slide the camera off first, then warm the adhesive gently with a hair dryer and use a plastic trim tool or fishing line to work under the pad, peeling slowly. Residue wipes away with isopropyl alcohol.
Adhesive mounts hold more securely over time, resist vibration and heat cycles better, and sit lower for a cleaner look. Suction mounts are more portable for multi-vehicle use. Choose adhesive for a permanent, sleek install; choose suction if you move the camera between cars often.
$14.98 vs. $29.95 — 50% off, plus 12% more with coupon OUTPOST12. Note: orders under $45.00 ship for $8.00, so bundling this mount with a camera or accessory maximizes value.
Official Cobra slide-mount design: sleek low-profile adhesive install with instant camera removal
Save 50% — $14.98 vs. $29.95 compare-at, plus an extra 12% off with coupon code OUTPOST12
Exact fit for SC 200, SC 200D, SC 400, and SC 400D smart dash cams — no aftermarket guesswork
Mount System: Adhesive pad with slide-on/off camera dock
Product Type: Adhesive windshield slide mount for dash cams
Compatibility: SC 200, SC 200D, SC 400, SC 400D
Model / Item #: CA-200ADHMNT-001
Compare-at Price: $29.95 USD
Current Sale Price: $14.98 USD
Seller: PowerHaven Outpost
Aftermarket mounts risk poor fit and camera ejection on bumpy roads. This official Cobra CA-200ADHMNT-001 adhesive slide mount is purpose-built for SC 200 and SC 400 series dash cams.
$14.98 — 50% off the compare-at price — plus 12% off with coupon OUTPOST12. Pair with a dash cam or accessory camera to reach $45.00 for free shipping. Buy online now.
Clean the windshield with isopropyl alcohol, peel the backing, press the mount flat behind the rearview mirror for 30 seconds, let it cure, then slide your SC 200 onto the mount until it clicks.
Mount it centrally behind the rearview mirror so the front lens has an unobstructed road view and accessory camera cables route cleanly along the headliner.
Yes. Slide the camera off, warm the adhesive with a hair dryer, and peel slowly with a plastic trim tool or fishing line. Residue removes with isopropyl alcohol.
Adhesive holds more securely, resists heat and vibration, and looks cleaner — ideal for a permanent install. Suction suits drivers who swap the camera between vehicles frequently.
It's $14.98 — 50% off the $29.95 compare-at price — with an extra 12% off using coupon OUTPOST12. Add it to a $45+ order for free shipping.
This is the real deal — same mount that came with my SC 400 originally. Adhesive held through a Texas summer and the slide mechanism clicks in securely. Cheap enough to keep a spare.
Stuck it on properly cleaned glass and it hasn't budged in months. Only note: you get one shot with the adhesive, so take your time positioning it. Otherwise perfect.
Exact replacement for my SC 200. No complaints.
The mount and slide mechanism are fine and match the original exactly, but the adhesive pad released during a cold snap after eight months. Cleaned the glass and stuck it back with the spare pad and it's holding so far. Decent but not flawless.
My original mount cracked when I yanked the cam off too hard. This replacement was half the price of a new unit and snapped right in. The slide-off design is really convenient once you get the hang of it.
Sits flush against the windshield and keeps the camera stable even on rough roads. Adhesive bond is strong. Wish it came with two pads, but at this price I'll just order another one.
I keep one in each vehicle so I can move my SC 400 between cars in seconds. The mount is sturdy, OEM quality, and the price during the sale was trivial. Highly recommended for multi-car households.
Followed the instructions, cleaned with alcohol, pressed firmly, and the mount still dropped the camera twice, the second time cracking the dash cam body. Maybe I got a bad adhesive batch, but I can't recommend it based on my experience.
Lost my original mount moving across the country. Ordered this, arrived in two days, stuck it on, and my SC 200 is back in action. Identical to the factory part.
Works exactly as intended as long as you prep the glass properly — clean with alcohol, let it dry, warm the pad slightly. Mine has survived highway speeds and pothole-ridden city streets without any movement.
Orders over $45.00 ship free. Otherwise, shipping is $8.00.
Hassle-free returns
SSL encrypted checkout
100% genuine products
Portable power stations, inverters, and solar gear from Goal Zero, Victron Energy, and Cobra — clear specs, fair prices, real support.
Email: support@powerhaven.shop
Address: 1420 Ridgeline Avenue, Suite 300, Reno, NV 89502, United States